Learn about the settings of the DRS feature.
The feature Distributed Resource Scheduler (DRS) is available in a VMware cluster, allowing load balancing of hosts by moving virtual machines automatically (vMotion). It will allocate VMs to the different hosts in the cluster based on their usage and resources.
Requirements
- a Hosted Private Cloud infrastructure
- a user account with access to vSphere (created in the OVHcloud Control Panel)
Instructions
The DRS functionality's purpose is to allocate resources more efficiently. It can either move the VMs to a host or pool (best suited) in your cluster or provide advice on the process.
Activation
DRS is enabled by default in the first cluster provided with your OVHcloud Hosted Private Cloud.
When a new cluster is created, you can enable it at the time of creation or afterward.
If DRS is not active in your cluster, go to the Configure tab and then select vSphere DRS available in the Services menu.
Click on EDIT and then on the slide button vSphere DRS to enable it.
Settings
In the same section, you will find four categories of options.
Automation
Three different levels of automation are available:
- Manual: DRS will not move VMs, you will need to manage moving and distributing your VMs independently.
- Partially Automated: DRS will advise you on migrating your VMs, but will only do so if you validate the move.
- Fully Automated: DRS will automatically move VMs, without your validation, based on the load on the hosts.
It is also possible to set a migration threshold between "Conservative" and "Aggressive" on automated modes.
The "Predictive DRS" option, available from VMware version 6.5, allows you to perform migrations based on the forecast metrics returned by VMware Aria Operations (formerly vRealize Operations). The latter is essential for the operation of this DRS option.
Finally, the "Virtual Machine Automation" option allows you to configure specific DRS settings for certain VMs in the VM Overrides submenu of the Configure tab. (Some VMs may have a partially automated migration mode while the cluster will be fully automated.)
Additional Options
You can configure three additional options in the DRS settings:
- VM Distribution: For availability, distribute a more even number of virtual machines across hosts.
- Memory Metric for Load Balancing: Load balancing based on the consumed memory of virtual machines rather than active memory. This setting is only recommended for clusters where host memory is not over-committed.
- CPU Over-Commitment: Limit CPU over-commitment for all hosts in the cluster. This setting will create a virtual CPU on a primary physical CPU ratio limit (vCPU:pCPU) implemented on each ESXi host.
Power Management
This option must always be disabled.
The main purpose of this option is to shut down hosts in your infrastructure if DRS determines that they are not needed while satisfying the failover level requested by HA.
However, OVHcloud monitoring will detect this operation as abnormal and create a data center intervention.
Advanced Options
Multiple advanced configuration settings can be used in your DRS cluster.
Here are some examples:
| Advanced Option Name | Description | Default value | Most aggressive value |
|---|---|---|---|
| UseDownTime | If cost analysis should take into account the workload impact of possible memory stalls during migration | 1 | 0 (no impact consideration) |
| IgnoreDownTimeLessThan | Threshold (in seconds) to discard cumulative migration stall times in cost analysis (can be increased if VM workloads are not sensitive to memory stalls during migration). | 1 | A large number (not including downtime) |
| MinImbalance | Used to calculate target imbalance | 50 | 0 |
| MinGoodness | Minimal improvement in cluster imbalance required for each move | Adaptive | 0 (All vMotion is considered) |
| MaxMovesPerHost | Maximum number of movements per recommended host per invocation | Adaptive | 0 (No limits) |
DRS rules
In the Configure tab you can find the management of VM/Host Rules.
- Keep Virtual Machines Together: VMs remain on the same host
- Separate Virtual Machines: Separate VMs on different hosts within a single cluster
-
Virtual Machines to Hosts: VMs that are members of the VM group of the specified cluster must run on the specified host group. It is necessary to create VM and host groups in the
VM/Host Groupsmenu.
The fourth rule, Virtual Machines to Virtual Machines is explained in our guide on VMware HA.
Go further
For more information and tutorials, please see our other VMware on OVHcloud or Hosted Private Cloud guides. You can also explore the guides for other OVHcloud products and services.